Axi-Rad®
Axi-Rad® is a revolutionary thermoplastic
retainer that captures threaded fasteners
in position on component parts until final
fastening operations are performed later in
the assembly sequence. FCT can also do the
assembly and ship the finished piece. Utilizing
a patented lobular design, the Axi-Rad
is used in a variety of applications globally,
including automotive powertrain and
body assemblies, aerospace, heavy truck,
industrial equipment and consumer products.
Application
Axi-Rad® is assembled onto a bolt, and the bolt and Axi-Rad are then inserted
into the mating hole in the component or casting. With Axi-Rad, the fastener
stays in place during shipping and handling so the module arrives ready to
place and tighten at final assembly. Commonly used for oil pans, valve covers,
alternators and generators, water pumps and electronic devices.
Benefits
- Eliminate fastener feeding from final assembly.
- Improve productivity by moving all fastener handling off the final assembly
line.
- Eliminate the cost of carrying fastener inventory at the final assembly plant.
- Reduce costs by eliminating the downtime and maintenance associated with
automated fastener feeding systems.
- Axi-Rad can be sold in bulk or assembled onto your bolt by FCT.
click on graphs to enlarge


Design Guide
- A chamfered hole must be used to prevent sharp edges
from shaving the retainer and facilitate ease of assembly
of the Axi-Rad to the hole.
- To insure proper function of the Axi-Rad, the insertion
hole must be clean, free of debris and oily residue.
- It is recommended that no contact be made between the
bolt and the dunnage during shipping to prevent movement
of the bolt and retainer from their installed position.
- Use with full-bodied fasteners is preferred.